Saudi Guardian International
| Project description The plant was built for the production of float glass. It is one of the largest producers of float glass in the Middle East |
| Requirements Due to the immense heat load and the tremendous input of energy necessary for the glass production a careful design, planning and implementation of Natural Ventilation was essentially necessary. |
| Solution AEROVENT Middle East W.L.L. implemented the principle of Natural Ventilation in combination with smoke ventilation. Ridge ventilators Type AEROTOP-IV were selected as exhaust air components. They are permanently open and absolutely weather-proof. Air inlet louvres Type AEROFLOW-JR-D were selected as air inlet components. They are operated electrically, the following positions can be adjusted "open"-45 deg"-"closed". The optimum aeration of the plant has been achieved with the a.m. system components. |
| Project
duration The fabrication, the supply and the co-ordination of the erection work was performed according to the general project time schedule. |
| Specialities Due to the close and constructive co-operation with the plant designer, the general contractor and the client it was possible to take all necessary project and basic data into consideration and to integrate it in the general project time schedule. |
